I-ASTM A 210 G.C engenamthungo ePhakathi-Ibhoyila yentsimbi yeCarbon kunye neeTyhubhu zeheater eFanelekileyo

I-ASTM A 210 GR.C engenamthungo ePhakathi- iBoiler yentsimbi yeCarbon kunye neeTyhubhu zeheater

Inkcazelo emfutshane:

Imibhobho yeBoiler yentsimbi yeKhabhoni engenamthungo ePhakathi kunye kunye neMibhobho yobushushu obuPhezulu boShishino lweBoiler

NgoMbhobho weNtsimbi weKhabhoni oPhezulu

Ubungakanani: 13.1mm-660mm

Ukutyeba kweendonga:2mm-100mm

Phelisa: plain end,beveled end.

Ubude: 5.8m, 6m, 11.8m, 12m okanye abathengi.

Ukupakisha: Ukuya kuthi ga kwi-6 ″ kwimiyanda, le ingasentla 6″ ikhululekile.

MOQ: Iitoni ezi-5

Imigaqo yentlawulo: LC/TT/DP

Thumela i-imeyile kuthi Whatsapp Ifowuni

Iinkcukacha zeMveliso

Iimveliso ezinxulumeneyo

Iithegi zeMveliso

Iinkcukacha ze-ASTM A210/SA210 zingenamthungoIntsimbi yeKhabhoni ePhakathiI-Boiler kunye ne-SuperheaterSingabonelela:

Ukwenziwa: Inkqubo engenamthungo, izotyiweyo ebandayo okanye eshushu isongwe

Ubungakanani: OD: 15.0 ~ 114mm WT: 2 ~ 10mm

IBanga: iBanga A-1, iBanga C

Ubude: 6M okanye ubude obuchaziweyo njengoko kufuneka

Isiphelo: Isiphelo esicacileyo, iBeveled End

Izinto eziphathekayo	Umgangatho	Ezobugcisa	IBanga	Ukusetyenziswa
Intsimbi yentsimbi	I-JIS G3441	Ukugqiba okushushu okanye ukugqiba okubandayo	SCM420TK, SCM415TK, SCM418TK, SCM430TK, njl.	Kwizakhiwo zoomatshini, ukuveliswa kweemoto okanye iinxalenye zomatshini
	I-ASTM A213	Ukugqiba okushushu okanye ukugqiba okubandayo	GR.T11 ,GR.T12,GR.T13	Ibhoyila kunye ne-super heater tubes
	I-ASTM A519	Ukugqiba okushushu okanye ukugqiba okubandayo	GR.1020,GR.1026,GR.1045,GR.4130, njl.	Umbhobho wentsimbi engenamthungo kunye nombhobho wentsimbi yealloyi koomatshini
	I-ASTM A335	Ukugqiba okushushu okanye ukugqiba okubandayo	GR.P9,GR.P11,GR.P5,GR.P22,GR.P91,njl	Ifanele ubushushu obuphezulu, uxinzelelo oluphezulu, ukuhanjiswa komphunga okanye ukwenziwa koomatshini
	I-ASTM A333	Ukugqiba okushushu okanye ukugqiba okubandayo	GR.1, GR.3,GR.4,GR.6, njl	Umbhobho wensimbi wezixhobo ze-cryogenic

Ukusetyenziswa kweI-ASTM A210/SA210Umthungo oPhakathiIbhoyila yentsimbi yeCarbonkunye neSuperheater

Umbhobho o-odolwe phantsi kolu luhlu lwenzelwe ipaneli yodonga, i-economizer, i-heater enkulu kunye nombhobho womphunga weebhoyila.

Ukubunjwa kweMichiza kunye neePropati zeMachenical ASTM A210/SA210AyinamthungoIbhoyila yentsimbi yeCarbon ePhakathi kunye ne-Superheater

IBanga kunye noKuqulunqwa kwemichiza (％)

IBanga	C	Mn	P	S	Si
A-1	≤0.27	≤0.93	≤0.035	≤0.035	≥0.10
C	≤0.35	0.29-1.06	≤0.035	≤0.035	≥0.10

Iipropati zoomatshini(MPa):

IBanga	Indawo yokuqina	Inqaku lesivuno	Elongation
A-1	≥415(60)	≥255(37)	≥30%
C	≥485(70)	≥275(40)	≥30%

Inkqubo yokuVeliswa kweI-ASTM A210/SA210 ingenamthungoIbhoyila yentsimbi yeCarbon ePhakathi kunye ne-Superheater

Imibhobho iya kwenziwa yinkqubo engenamthungo kwaye iya kutshisa okanye igqitywe ngokubanda, njengoko kuchaziwe.

Iityhubhu ezigqityiweyo ezishushu akufuneki zinyangwe ngobushushu.Iityhubhu ezigqityiweyo ezibandayo ziya kuba yi-anneal okanye unyango oluqhelekileyo lobushushu emva kwenkqubo yokugqiba ebandayo.

Iimvavanyo zoomatshini ezifunekayo

1. Uvavanyo loxinzelelo
2. Uvavanyo lokucaba
3. Uvavanyo lomlilo
4. Uvavanyo lokuqina
5. Uvavanyo loMbane we-Hydrostatic okanye ongonakaliyo

Uvavanyo loomatshini

Uvavanyo lobulukhuni

Uvavanyo lweePropati zoomatshini

Ukupakishwa kweCarbonUmbhobho wentsimbi ongenamthungo

Umbhobho ongenanto okanye uMnyama / iVarnish yokugqoka (elungiselelwe);
Kwizithungu ezinezilingi ezimbini zomqhaphu;
Zombini ziphela kunye nabakhuseli bokugqibela;
Isiphelo esicacileyo, isiphelo se-bevel (2" nangaphezulu kunye neziphelo ze-bevel, idigri: 30 ~ 35 °);
Ukumakisha.